Yamaha DM 2000 Version 2 Gebruikershandleiding - Pagina 14

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Yamaha DM 2000 Version 2. Yamaha DM 2000 Version 2 44 pagina's. Version 2
Ook voor Yamaha DM 2000 Version 2: Installatiehandleiding (28 pagina's), Installatiehandleiding (14 pagina's), Installatiehandleiding (22 pagina's), Software-installatiehandleiding (13 pagina's), Gebruikershandleiding (1 pagina's), Aanvullende handleiding (4 pagina's), Gebruikershandleiding (37 pagina's), Installatiehandleiding (35 pagina's), Oriëntatiehandboek (8 pagina's), Handleiding redundantie (8 pagina's), Gebruikershandleiding (3 pagina's), (Duits) Installatiehandleiding van het besturingssysteem (13 pagina's)

Chapter 1—Getting Started

Setting up OMS

OMS Studio Setup ﬁles for the DM2000 are supplied on the included CD-ROM. The setup

ﬁles are used for setting up OMS when using the serial or USB ports.

Note: When using USB, OMS and the USB MIDI driver should be installed before proceeding.

Turn off the DM2000 and use a USB cable to connect the USB port of the

computer (or the USB hub) to the TO HOST USB port of the DM2000.

Turn on the DM2000 and start the computer.

Insert the included CD-ROM into the CD-ROM drive of your Mac.

The CD-ROM icon appears on the desktop.

Double-click the CD-ROM icon, "OMS_", and "OMS Setup for YAMAHA."

Three ﬁles "DM2000-Modem," "DM2000-Printer," and "DM2000-USB" appear. Copy

these to the hard disk on your computer.

Double-click one of "DM2000-Modem" or "DM2000-Printer" or

"DM2000-USB" to start OMS Setup.

The setup ﬁles are used as follows.

DM2000-Modem: Used when connecting the modem port of your Mac to the DM2000.

DM2000-Printer: Used when connecting the printer port of your Mac to the DM2000.

DM2000-USB: Used when connecting the USB port of your Mac to the DM2000.

Note: A USB hub is necessary when several DM2000s are connected to the computer.

After starting the OMS Setup, the selected

Studio Setup ﬁle opens. The

DM2000-USB version is shown on the

right.

Note: When using either of the serial ports (modem or printer), go to OMS Setup Preferences

and deselect "Use Apple DMA driver when available."

Note: If " " is not indicated next to the setup ﬁle name, choose Make Current from the File

menu, and then Save.

Studio Manager—Owner's Manual

Indicates this setup is available