Yamaha DM 2000 Version 2 Gebruikershandleiding - Pagina 12

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Yamaha DM 2000 Version 2. Yamaha DM 2000 Version 2 44 pagina's. Version 2
Ook voor Yamaha DM 2000 Version 2: Installatiehandleiding (28 pagina's), Installatiehandleiding (14 pagina's), Installatiehandleiding (22 pagina's), Software-installatiehandleiding (13 pagina's), Gebruikershandleiding (1 pagina's), Aanvullende handleiding (4 pagina's), Gebruikershandleiding (37 pagina's), Installatiehandleiding (35 pagina's), Oriëntatiehandboek (8 pagina's), Handleiding redundantie (8 pagina's), Gebruikershandleiding (3 pagina's), (Duits) Installatiehandleiding van het besturingssysteem (13 pagina's)

Chapter 1—Getting Started

After the installation, click Restart.

Note: After the installation is complete, you may encounter an error message warning that the

installer did not close. In this case, choose Quit from the File menu to close the installer. Then

restart the computer.

After restarting, the Opcode folder is created containing the OMS Applications folder (on

the startup disk as the default location).

Copy the "OMS_2.3_Mac.pdf" on the CD-ROM to the "OMS Applications"

folder (drag-and-drop it to the folder).

Refer to the "OMS_2.3_Mac.pdf" (English version only) for information on how to use

OMS.

Copy the "OMS Setup for YAMAHA" on the CD-ROM to the "OMS Applica-

tions" folder (drag-and-drop it to the folder).

In the "OMS Setup for YAMAHA" folder there are the OMS Setup ﬁles for the Yamaha tone

generators, which can be used as templates.

USB MIDI Driver

To operate the DM2000 from your computer via USB, you'll need to install the USB MIDI

driver. This software transfers MIDI data back and forth between Studio Manager and the

DM2000 via USB.

Install OMS ﬁrst, then the USB MIDI driver, and then set up OMS.

Start the computer.

Insert the included CD-ROM into the CD-ROM drive.

The CD-ROM icon is displayed on the desktop.

Double-click the CD-ROM icon and double-click the "USBdrv_" folder.

Double-click "Install USB Driver."

The Install USB Driver setup dialog appears, as shown below.

The "Install Location" displays the destination of the installation.

If you want to change the destination disk or folder, click the Switch Disk

button and use the pop-up menu to specify the destination.

Note: This pop-up menu usually displays the startup disk as the destination.

Studio Manager—Owner's Manual

Computer

Sequence

Software

USB cable

OMS

Driver

DM2000