Yamaha DM 2000 Version 2 소유자 매뉴얼 - 페이지 12

{카테고리_이름} Yamaha DM 2000 Version 2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DM 2000 Version 2 44 페이지. Version 2
Yamaha DM 2000 Version 2에 대해서도 마찬가지입니다: 설치 매뉴얼 (28 페이지), 설치 매뉴얼 (14 페이지), 설치 매뉴얼 (22 페이지), 소프트웨어 설치 매뉴얼 (13 페이지), 소유자 매뉴얼 (1 페이지), 보충 설명서 (4 페이지), 소유자 매뉴얼 (37 페이지), 설정 매뉴얼 (35 페이지), 오리엔테이션 매뉴얼 (8 페이지), 이중화 매뉴얼 (8 페이지), 소유자 매뉴얼 (3 페이지), (독일어) 운영 체제 설치 매뉴얼 (13 페이지)

페이지 인쇄
Yamaha DM 2000 Version 2 소유자 매뉴얼
9
Chapter 1—Getting Started
After the installation, click Restart.
4
Note: After the installation is complete, you may encounter an error message warning that the
installer did not close. In this case, choose Quit from the File menu to close the installer. Then
restart the computer.
After restarting, the Opcode folder is created containing the OMS Applications folder (on
the startup disk as the default location).
Copy the "OMS_2.3_Mac.pdf" on the CD-ROM to the "OMS Applications"
5
folder (drag-and-drop it to the folder).
Refer to the "OMS_2.3_Mac.pdf" (English version only) for information on how to use
OMS.
Copy the "OMS Setup for YAMAHA" on the CD-ROM to the "OMS Applica-
6
tions" folder (drag-and-drop it to the folder).
In the "OMS Setup for YAMAHA" folder there are the OMS Setup files for the Yamaha tone
generators, which can be used as templates.
USB MIDI Driver
To operate the DM2000 from your computer via USB, you'll need to install the USB MIDI
driver. This software transfers MIDI data back and forth between Studio Manager and the
DM2000 via USB.
Install OMS first, then the USB MIDI driver, and then set up OMS.
Start the computer.
1
Insert the included CD-ROM into the CD-ROM drive.
2
The CD-ROM icon is displayed on the desktop.
3
Double-click the CD-ROM icon and double-click the "USBdrv_" folder.
Double-click "Install USB Driver."
4
The Install USB Driver setup dialog appears, as shown below.
The "Install Location" displays the destination of the installation.
5
If you want to change the destination disk or folder, click the Switch Disk
button and use the pop-up menu to specify the destination.
Note: This pop-up menu usually displays the startup disk as the destination.
Studio Manager—Owner's Manual
Computer
Sequence
Software
USB cable
OMS
Driver
DM2000