Yamaha YDP-101 Gebruikershandleiding - Pagina 23

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Yamaha YDP-101. Yamaha YDP-101 48 pagina's. Yamaha digital piano owner's manual
Ook voor Yamaha YDP-101: (Engels) Gebruiksaanwijzing (47 pagina's)

Pagina afdrukken

START /

TRACK

STOP

REC

START /

TRACK

STOP

REC

Playback

To play back what you've recorded, first make sure that the green track

indicators of the tracks you want to play are lit. If not, press the corresponding

track button(s) so that they are lit. Then press the [START/STOP] button.

Playback starts from the beginning of the recorded data, and will stop automati-

cally at the end of the recorded data. You can also stop playback at any time by

pressing the [START/STOP] button.

To mute a track so that it doesn't play back, press the corresponding track

button so that its indicator goes out (press again to turn the track back on).

The current measure number appears on the display during playback.

• It is possible to play along on the keyboard during playback. In this case, the

playback voice and the voice you play on the keyboard are not the same. The

playback voice is the voice that was set when the data was recorded. The voice you

play on the keyboard is the voice that is selected on the panel.

• The playback volume and tempo can be adjusted by using the [MASTER VOLUME]

control and [TEMPO M / L ] buttons (press both [TEMPO M / L ] buttons simulta-

neously to recall the default tempo).

• All recorder data will be retained in memory for about one week after the power is

turned off. If you want to keep your recorded data for longer periods, turn the power

on for a few minutes at least once a week. It is also possible to store it to an

external MIDI storage device by using the Bulk Data Dump function described on

page 30.

• The track indicators will not light automatically when the power is turned on even if

the recorder contains data. It is therefore necessary to press the track buttons so

that the corresponding green indicators light before starting recorder playback. It is

also a good idea to press the track buttons to check if the tracks contain data

before recording. If the green indicator lights when the corresponding track button

is pressed, that track contains data which will be erased and replaced by the newly-

recorded data.

• If the metronome is being used during playback, the metronome will automatically

stop when playback is stopped.

• During recorder playback, the volume of a track which is turned off will always be

"0" (i.e. the "Piano Song Part Cancel Volume" function — page 27 — only affects

piano song playback.

• The playback data is not transmitted via the MIDI OUT connector.

• Playback cannot be started when the demo/piano song mode is engaged.

• Playback cannot be started when the recorder contains no data, or when both track

buttons are off.

• When using REVERB during playback, depending upon the conditions one reverb

type will take priority.

Synchro Start

....................................................................................................................

When the Synchro Start function is engaged, recorder playback will begin

automatically as soon as you start playing on the keyboard.

To engage the Synchro Start function press the [START/STOP] button

while holding a track button which is ON. The rightmost dot on the display will

flash at the current tempo. (Repeat the previous operation to disengage the

Syncro Start function.) Playback will then start as soon as you begin playing on

the keyboard.

If you hold a track button which is OFF while pressing the [START/STOP]

button, that track will be turned ON and the Synchro Start mode will be engaged.

Left Pedal Start/Stop

The left pedal can be assigned to start and stop recorder playback via the

"Left Pedal Mode" function described on page 27. This is convenient for start-

ing playback of the recorded part anytime after you have started playing.

Using the Recorder

.................................................................................................

YDP-101