Yamaha AX-497 Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Yamaha AX-497. Yamaha AX-497 23 pagina's. Stereo amplifier
Ook voor Yamaha AX-497: Onderhoudshandleiding (36 pagina's), Gebruikershandleiding (24 pagina's)

Pagina afdrukken

Remove approximately 10 mm (3/8 in) of

insulation from the end of each speaker

cable and twist the exposed wires of the

cable together to prevent short circuits.

10 mm (3/8 in)

Unscrew the knob.

Insert one bare wire into the hole in the side

of each terminal.

Tighten the knob to secure the wire.

Red: positive (+)

Black: negative (–)

Red: positive (+)

Black: negative (–)

Red: positive (+)

Black: negative (–)

■ Connecting the banana plug

(With the exception of Asia, Korea, U.K. and

Europe models)

First, tighten the knob and then insert the banana plug into

the end of the corresponding terminal.

Banana plug

Notes

• One or two speaker sets can be connected to this unit. If you use

only one speaker set, connect it to either the SPEAKERS A or B

terminals.

• Use speakers with the specified impedance shown on the rear

panel of this unit.

CONNECTIONS