Clarke CAG120 Gebruiks- en onderhoudsinstructies - Pagina 3
Blader online of download pdf Gebruiks- en onderhoudsinstructies voor {categorie_naam} Clarke CAG120. Clarke CAG120 6 pagina's. 4½” (115mm) angle grinder
Pagina afdrukken
Troubleshooting
Problem
Possible Cause
Tool will not operate
1. No supply
2. Switch is faulty
3. Brushes badly worn
4. Fuse blown
5. Motor faulty
1. Flange nut not tight
Motor runs but disc
does not turn
2. Gear shaft or key
broken
Heavy internal
1. Faulty motor
sparking
2. Badly worn brushes
Motor gets hot
1. Work load too heavy
2. Low supply voltage
it is of the correct value,
fully unreeled
Excessive vibration
1. Disc not mounted
correctly or is damaged
2. Bearings worn
Specification
Model No ................................................................. CAG 120
Part No ..................................................................... 6470120
Supply Voltage ........................................................ 230 V AC, 50 Hz, 1 Phase
Fuse Rating ............................................................... 13A
Insulation Class ........................................................ E
No Load Speed ....................................................... 11,000 RPM
Maximum Cutting Wheel Diameter ..................... 115mm
Cutting Wheel Bore ................................................ 22mm
Drive Spindle Thread ............................................... M14
Tool Weight ............................................................... 2.5kg
Please note that the details and specifications contained herein are correct at the time of going
to print. However CLARKE International reserve the right to change specifications at any time
without prior notice. Always consult the machines data plate
Remedy
1. Check supply and rectify
where necessary.
2. Consult your Clarke dealer
3. Check and replace if necessary
4. Check and replace if necessary
If condition persists, consult your
dealer
5. Consult your Clarke dealer.
1. Tighten flange nut
2. Consult your Clarke dealer
1. Consult your Clarke dealer
2. Renew brushes (see p.8)
1. Reduce force applied to tool
2. Ensure supply voltage is correct.
If extension cable is used, ensure
and is
1. Check and rectify
2. Consult your Clarke dealer
9
Contents
Guarantee ........................................................................................................ 2
Features and Use ............................................................................................ 2
For your Own Safety ........................................................................................ 3
General Safety Precautions : For Power Tools ............................................. 3
Safety Precautions : For Angle Grinders ....................................................... 4
Electrical Connections ................................................................................... 5
Overview of your Angle Grinder ................................................................... 6
Mounting the Grinding Wheel / Cutting Disc .............................................. 7
Maintenance ................................................................................................... 8
Troubleshooting ............................................................................................... 9
Specifications .................................................................................................. 9
Spare Parts Diagram ....................................................................................... 10
Spare Parts List ................................................................................................. 10
Recommended Grinding Wheels / Cutting Discs ...................................... 10
Thank you for purchasing this Clarke Angle Grinder. Before putting to use, please
read these instructions carefully. This is for your own safety and that of others around
you, and to help you achieve long and trouble free service from the Grinder.
Guarantee
This product is guaranteed against faults in manufacture for 12 months from
purchase date. Keep your receipt as proof of purchase.
This guarantee is invalid if the product has been abused or tampered with in any
way, or not used for the purpose for which it is intended. The reason for return
must be clearly stated. This guarantee does not affect your statutory rights.
Features and Use
This Angle grinder is a hand held power tool that uses abrasive disks to grind metals
or masonry. It is intended for D.I.Y use only. The grinder features an adjustable
guard, a spindle lock and removable handle grip that make it easy to set up and
use.
2