Clarke CHG2000C Gebruiksaanwijzing - Pagina 10

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Clarke CHG2000C. Clarke CHG2000C 13 pagina's. Hot air gun

THAWING WATER PIPES

Fit the reflector nozzle to the front of the hot air gun.

1. Always heat frozen areas inwards from the edge to the centre.

2. Take special care when defrosting plastic pipes.

3. Provide protection against heat damage to nearby paint and wall

coverings where necessary.

4. Be aware that copper gas pipes can be difficult to distinguish from copper

water pipes. Always check first.

5. Copper pipes are soldered together, therefore should not be heated

above 200

This hot air gun is maintenance free, except always ensure that the air intake

vents are kept clean. If used in a dusty environment clean the tool with low

pressure compressed air.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]