Clarke CSB34 Handleiding voor bediening en onderhoud - Pagina 6

Blader online of download pdf Handleiding voor bediening en onderhoud voor {categorie_naam} Clarke CSB34. Clarke CSB34 12 pagina's. Siphon feed

5. Fit the leg/prop stand to the drum

and secure in place using 2 short

bolts (1), 4 washers (3) and 2 nuts

(7).

6. Secure in leg/prop stand to the

lower frame using the long bolt

(9), 2 washer (3) and 1 nut (7).

7. Place a jubilee clip (8) onto each

end of the hose.

8. Firmly push the end of the hose

onto the abrasive inlet on the

sandblasting gun.

9. Slide one of the jubilee clips so

that it is overlapping both the

hose and the abrasive inlet.

10. Tighten the jubilee clip with a

screwdriver.

11. Firmly push the opposite end of

the hose onto the abrasive outlet,

located at the base of the drum.

NOTE: there is an air hole in the

abrasive outlet - do not

cover this air hole with the

abrasive hose.

12. Position the remaining jubilee clip

so that it is overlapping both the

hose and the abrasive outlet of

the drum.

13. Tighten the jubilee clip with a screwdriver.