Clarke CTIDG2 Handleiding voor bediening en onderhoud - Pagina 5
Blader online of download pdf Handleiding voor bediening en onderhoud voor {categorie_naam} Clarke CTIDG2. Clarke CTIDG2 13 pagina's. Digital tyre inflator
Pagina afdrukken
PREPARATION
FITTING THE BATTERIES
The inflator requires 2 x AAA batteries. If the voltage of the batteries falls below
2.6 volts, the battery icon will flash continuously until it shuts down. If the
voltage of the batteries falls below 2.5 volts the LOW "LO" battery icon
appears while the power is on and then shuts down automatically. The
batteries must be changed if the battery icon flashes.
1. Unscrew the battery cap.
2. Slide the batteries into the tyre
inflator with the positive end
facing outwards.
3. Replace the battery cap carefully
and DO NOT over tighten.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
5