Clarke CTIDG2 Handleiding voor bediening en onderhoud - Pagina 6
Blader online of download pdf Handleiding voor bediening en onderhoud voor {categorie_naam} Clarke CTIDG2. Clarke CTIDG2 13 pagina's. Digital tyre inflator
Pagina afdrukken
CONNECTING THE AIRLINE
CAUTION: THIS PRODUCT MAY HAVE A LOWER WORKING PRESSURE
THAN SOME COMPRESSORS WILL SUPPLY, THEREFORE, AN AIRLINE
REGULATOR SHOULD BE INSTALLED.
CAUTION: AIRLINE LUBRICATORS SHOULD NOT BE USED WITH THIS ITEM.
CAUTION: ALWAYS USE DRY FILTERED COMPRESSED AIR & AVOID UNDUE
EXPOSURE TO MOISTURE.
1. Attach the airline hose to the tyre inflator and fully tighten. Use PTFE tape if
needed. Turn on the air supply and check that the airline pressure does not
exceed 13.8 bar (200 psi).
2. Ensure all fixed air connections are properly sealed using PTFE tape or pipe
sealant.
AIRLINE ACCESSORIES AND EQUIPMENT
An extensive range of airline equipment is available from your CLARKE dealer
including hoses, retractable hose reels, filter/regulators, in-line regulators,
pressure gauges and safety goggles.
THE DISPLAY PANEL
Press and hold the button on the front
of the unit to activate.
Once activated, press and hold the
button for 2 seconds to change the
unit of measurement to either psi, kPa
or bar.
The display panel will illuminate and
display as shown.
The display should time out and
switch off after 9 seconds.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
6