Zanussi ZRD 27 JC Instructieboek - Pagina 10

Blader online of download pdf Instructieboek voor {categorie_naam} Zanussi ZRD 27 JC. Zanussi ZRD 27 JC 18 pagina's. Refrigerator- freezer combination

Pagina afdrukken

1. General Information

Technical data

Model

Gross capacity (l)

Net capacity (l)

Width (mm)

Height (mm)

Depth (mm)

Energy consumption (kWh/24h)

(kWh/year)

Energy class, according to EU standards

Freezing capacity (kg/24h)

Rising time (h)

Rated power (W)

Weight (kg)

Number of compressors

Installing the appliance

Transportation, unpacking

It is recommended to deliver the appliance in origi-

nal packaging, in vertical position considering the

protective warning on packaging.

After each transportation the appliance must not be

switched on for approx. 2 hours.

Unpack the appliance and check if there are damages on

it. Report possible damages immediately to the place you

bought it. In that case retain packaging.

Cleaning

Remove every adhesive tape, which ensure the parts not

to move in the appliance.

Wash the inside of the appliance using lukewarm water

and mild detergent. Use soft cloth.

After cleaning wipe out the inside of the appliance.

Placement

The ambient temperature has an effect on the energy con-

sumption and proper operation of the appliance. When

placing, take into consideration that it is practi- cal to oper-

ate the appliance between ambient tem- perature limits

according to the climate class that is given in the chart

below and can be found in the data label.

Class of climate

Instructions for the Installer

ZRD 27 JC

Freezer:

Refrigerator: 220

Freezer:

Refrigerator: 217

Ambient temperature

+10 ... +32 °C

+16 ... +32 °C

+18 ... + 38 °C

545

1590

604

0,82

299

If the ambient temperature goes below the lower data the

temperature of the cooling compartment can go beyond

the prescribed temperature.

If the ambient temperature goes beyond the upper data

this means longer operating time of the compressor,

breakdown in the automatic defrosting increasing temper-

ature in the cooling compartment or increasing energy

consumption.

When placing the appliance ensure that it stands level.

This can be achieved by two adjustable feet (1) at the bot-

tom in front.