Zanussi ZWP 582 Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Zanussi ZWP 582. Zanussi ZWP 582 32 pagina's.
Ook voor Zanussi ZWP 582: Gebruikershandleiding (16 pagina's)

Pagina afdrukken

NOTE ! This machine is made for use in normal

inside temperature. Manufacturer is not respon-

sible for freezing damages.

Operating Problems

Numerous checks were carried out on your ap-

pliance before it left the factory. However,

should you notice a malfunction, please refer to

Problems

The appliance doesn't start

or doesn't fill:

The appliance fills but

empties straight away:

The appliance doesn't

rinse or doesn't empty:

The appliance doesn't

spin:

You have found water

around the appliance:

The washing results are

not satisfactory :

The appliance vibrates, is

noisy:

• the appliance isn't plugged in correctly, the electrical installation isn't work-

ing, there is a power failure,

• the lid of your appliance and the drum shutters aren't closed firmly,

• the programme start command hasn't been properly selected,

• the water supply has been cut off, the water inlet tap is closed,

• the water inlet filters are dirty (see "Care and cleaning ").

• the drainage U-piece is fixed too low (see "Installation").

• the drain hose is blocked or bent,

• the drainage filter is obstructed (see "Care and cleaning "),

• the out of balance detector has been activated: washing is unevenly distrib-

uted in the drum,

• the "Drain" programme or "Night Cycle" or "Rinse hold" option have been

selected,

• the height of the drainage U-piece is unsuitable.

• balance problem with the laundry load: add more laundry or manually adjust

the items in the drum.

• too much detergent has caused foam to overflow,

• the detergent is unsuitable for machine washing,

• the drainage U-piece isn't attached correctly,

• the water inlet hose is leaking.

• the detergent is unsuitable for machine washing,

• there is too much washing in the drum,

• the wash cycle is unsuitable,

• there isn't enough detergent.

• all packaging have not been removed from the appliance (see "Installation"),

• the appliance isn't level and is unbalanced (see "Installation"),

• the appliance is too close to the wall or furniture,

• washing is unevenly distributed in the drum, the load is too small,

• the appliance is in running in period, noise will disappear with time.

the sections below before contacting the after-

sales service.

Causes