Zanussi ZWP 582 Gebruikershandleiding - Pagina 11
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Zanussi ZWP 582. Zanussi ZWP 582 32 pagina's.
Ook voor Zanussi ZWP 582: Gebruikershandleiding (16 pagina's)

Problems
The wash cycle is much
too long:
The appliance stops during
a wash cycle:
The lid doesn't open at the
end of the cycle:
Softener runs directly into
the drum when filling the
dispenser box:
The "Start/Pause" push-
1)
2)
button
flashes red
1) On some models, the audible signals can sound
2) After solving any problems, press "Start/Pause" pushbutton to restart the interrupted programme.
Detergents and Additives
Only use detergents and additives designed for
use in a washing machine. We do not recom-
mend mixing different types of detergents. This
may spoil the washing. There are no restrictions
on the use of powder detergents. Use liquid
detergents for low temperature wash pro-
grammes. Liquid detergents must not be used
Technical Specifications
DIMENSIONS
LINE VOLTAGE /FREQUENCY
POWER CONSUMPTION
www.zanussi.com
• the water inlet filters are dirty (see "Care and cleaning "),
• the power or water supply has been cut off,
• the motor overheating detector has been activated,
• the water inlet temperature is lower than usual,
• the foam detection security system has been activated (too much detergent)
and the washing machine has begun draining the foam,
• the out of balance detector has been activated: an extra phase has been
added to distribute washing more evenly in the drum.
• the water or electricity supply is defective,
• a "Rinse hold" has been selected,
• the drum shutters are open.
• the temperature inside the drum is too high,
• the lid unlocks 1 - 2 minutes after the end of the cycle.
• you have gone past the MAX indicator.
• the lid is not closed properly,
:
• the drainage filter is obstructed,
• the drain hose is blocked or bent,
• the drain hose is fixed to high (see "Installation"),
• the drainage pump is blocked,
• the standpipes blocked,
• the water tap is closed, the water supply has been cut off.
Height
Width
Depth
Causes
when a prewash has been selected. For cycles
without prewash, pour the liquid detergent di-
rectly into the drum or use a special dosing de-
vice (supplied by the detergent's manufacturer).
Detergent tablets or doses must be placed in
the detergent compartment of your appliance's
dispenser box.
850 mm
400 mm
600 mm
230 V / 50 Hz
2300 W
11