Zanussi ZKT 863 LX Handleiding voor installatie en gebruik - Pagina 19
Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} Zanussi ZKT 863 LX. Zanussi ZKT 863 LX 36 pagina's. Ceramic hob
Ook voor Zanussi ZKT 863 LX: Handleiding voor installatie en gebruik (32 pagina's)
Pagina afdrukken
What to do if ...
Problem
The cooking zones will
not switch on or are not
functioning
Acoustic signal sounds
when appliance is
switched off
The residual heat indi-
cator is not displaying
anything
Possible cause
More than 10 seconds
have passed since the
appliance was
switched on
The child safety device
l
is switched on
Several sensor fields
were touched at the
same time
Safety cut-out has
been triggered
The lock is switched on
l
The control panel is
wholly or partly covered
by objects.
The cooking zone was
only on for a short time
and is therefore not hot
Remedy
Switch the appliance
on again.
Deactivate the child
safety device (See the
section "Child safety
device")
Only touch one sensor
field
Remove any objects
(pan, cloths, etc.) that
are lying on the control
panel. Switch the appli-
ance on again
Switch off the lock (See
the section "Locking/
unlocking the control
panel")
Remove objects.
If the cooking zone is
supposed to be hot,
call your local Service
Force Centre.
19