Zanussi ZKT 863 LX Handleiding voor installatie en gebruik - Pagina 20
Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} Zanussi ZKT 863 LX. Zanussi ZKT 863 LX 36 pagina's. Ceramic hob
Ook voor Zanussi ZKT 863 LX: Handleiding voor installatie en gebruik (32 pagina's)
Problem
The automatic warm up
function is not switch-
ing itself on
Acoustic signal sounds
and appliance switch-
es itself on and then off
again; after 5 seconds
another acoustic signal
sounds
_
is lit
20
Possible cause
There is still residual
heat on the cooking
zone h
The highest heat set-
ting is set Ç
The heat setting was
set using the sensor
field
The On/Off sensor field
has been covered up,
e.g. by a cloth
Overheating protection
for the cooking zone
has been triggered
Safety cut-out has
been triggered
Remedy
Let the cooking zone
cool down
The highest heat set-
ting has the same pow-
er as the automatic
warm up function
1. Switching off the
cooking zone
1. Set the cooking zone
using the sensor field
Do not place any ob-
jects on the control
panel
Switch off the cooking
zone. Switch the cook-
ing zone on again
Switch off the cooking
zone. Switch the cook-
ing zone on again