Zanussi ZKT 863 LX Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 20
Hob Zanussi ZKT 863 LX için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. Zanussi ZKT 863 LX 36 sayfaları. Ceramic hob
Ayrıca Zanussi ZKT 863 LX için: Kurulum ve Kullanım Talimatları Kılavuzu (32 sayfalar)
Sayfayı Yazdır
Problem
The automatic warm up
function is not switch-
ing itself on
Acoustic signal sounds
and appliance switch-
es itself on and then off
again; after 5 seconds
another acoustic signal
sounds
_
is lit
20
Possible cause
There is still residual
heat on the cooking
zone h
The highest heat set-
ting is set Ç
The heat setting was
set using the sensor
field
The On/Off sensor field
has been covered up,
e.g. by a cloth
Overheating protection
for the cooking zone
has been triggered
Safety cut-out has
been triggered
Remedy
Let the cooking zone
cool down
The highest heat set-
ting has the same pow-
er as the automatic
warm up function
1. Switching off the
cooking zone
1. Set the cooking zone
using the sensor field
Do not place any ob-
jects on the control
panel
Switch off the cooking
zone. Switch the cook-
ing zone on again
Switch off the cooking
zone. Switch the cook-
ing zone on again