Zanussi ZYAN9EW0 Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Zanussi ZYAN9EW0. Zanussi ZYAN9EW0 17 pagina's.
Pagina afdrukken
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
1. Connect the wire coloured green and yellow to
the terminal marked either with the letter "E" or
by the earth symbol
yellow.
2. Connect the wire coloured blue to the terminal
either marked with the letter "N" or coloured
black.
3. Connect the wire coloured brown to the
terminal either marked with the "L" or coloured
red.
4. Check that no cut, or stray strands of wire is
present and the cord clamp (E) is secure over
the outer sheath.
Make sure the electricity supply voltage is the
same as that indicated on the appliance rating
plate.
CONTROL PANEL
Power indicator light
1
Temperature regulator and On/Off switch
2
FastFreeze light
3
SWITCHING ON
1. Insert the plug into the wall socket.
2. Turn the Temperature regulator clockwise to a
medium setting.
If the temperature inside the appliance is too high,
the Alarm light will blink and the acoustic alarm will
turn on.
3. Push the FastFreeze switch and the acoustic
alarm will turn off. The Alarm light will blink until
the internal temperature has reached a level
required for the safe conservation of frozen
food.
or coloured green and
1
2
5. Switch on the appliance.
The appliance is supplied with a 13 amp fuse (B).
In the event of having to change the fuse in the plug
supplied, a 13 amp ASTA approved (BS 1362)
fuse must be used.
WARNING! A cut off plug inserted
into a 13 amp socket is a serious
safety (shock) hazard. Ensure that it is
disposed of safely.
DOOR REVERSIBILITY
Please refer to the separate document with
instructions on installation and door reversal.
CAUTION! At every stage of reversing
the door protect the floor from
scratching with a durable material.
3
4
5
FastFreeze switch and alarm reset switch
4
Alarm light
5
SWITCHING OFF
1. Turn the Temperature regulator to the "O"
position.
The Power indicator light will switch off.
2. Remove the plug from the wall socket.
TEMPERATURE REGULATION
The temperature is regulated automatically.
However, you can set a temperature inside the
appliance yourself.
Choose the setting keeping in mind that the
temperature inside the appliance depends on:
•
room temperature,
7