Zanussi ZYAN9EW0 Kullanıcı Kılavuzu - Sayfa 7

Dondurucu Zanussi ZYAN9EW0 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi ZYAN9EW0 17 sayfaları.

Sayfayı Yazdır

As the colours of the wires in the mains lead of this

appliance may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows:

1. Connect the wire coloured green and yellow to

the terminal marked either with the letter "E" or

by the earth symbol

yellow.

2. Connect the wire coloured blue to the terminal

either marked with the letter "N" or coloured

black.

3. Connect the wire coloured brown to the

terminal either marked with the "L" or coloured

red.

4. Check that no cut, or stray strands of wire is

present and the cord clamp (E) is secure over

the outer sheath.

Make sure the electricity supply voltage is the

same as that indicated on the appliance rating

plate.

CONTROL PANEL

Power indicator light

Temperature regulator and On/Off switch

FastFreeze light

SWITCHING ON

1. Insert the plug into the wall socket.

2. Turn the Temperature regulator clockwise to a

medium setting.

If the temperature inside the appliance is too high,

the Alarm light will blink and the acoustic alarm will

turn on.

3. Push the FastFreeze switch and the acoustic

alarm will turn off. The Alarm light will blink until

the internal temperature has reached a level

required for the safe conservation of frozen

food.

or coloured green and

5. Switch on the appliance.

The appliance is supplied with a 13 amp fuse (B).

In the event of having to change the fuse in the plug

supplied, a 13 amp ASTA approved (BS 1362)

fuse must be used.

WARNING! A cut off plug inserted

into a 13 amp socket is a serious

safety (shock) hazard. Ensure that it is

disposed of safely.

DOOR REVERSIBILITY

Please refer to the separate document with

instructions on installation and door reversal.

CAUTION! At every stage of reversing

the door protect the floor from

scratching with a durable material.

FastFreeze switch and alarm reset switch

Alarm light

SWITCHING OFF

1. Turn the Temperature regulator to the "O"

position.

The Power indicator light will switch off.

2. Remove the plug from the wall socket.

TEMPERATURE REGULATION

The temperature is regulated automatically.

However, you can set a temperature inside the

appliance yourself.

Choose the setting keeping in mind that the

temperature inside the appliance depends on:

•

room temperature,