Zanussi ZCG43050WA Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Zanussi ZCG43050WA. Zanussi ZCG43050WA 29 pagina's.

Pagina afdrukken
If the burner accidentally goes out,
turn the knob to the off position and try
to light the burner again after minimum
1 minute.
BURNER OVERVIEW
REPLACING BURNER PARTS
1. Put carefully the burner crown on the burner
body. Let the crown fall freely onto the body.
Do not use force.
Make sure that the hole in the crown is above
the ignition candle.
Make sure that the location pegs are in the
slots in the burner body.
Make sure that you can move the crown a small
distance from side to side.
2. Put the burner cap centrally on top of the
crown.
Make sure that the cap is correctly installed,
with the enamel side up and you can move the
cap from side to side and front to back.

HOB - HINTS AND TIPS

WARNING! Refer to Safety chapters.
COOKWARE
WARNING! Do not put the same pan
on two burners.
A. Burner cap
B. Burner crown
C. Ignition candle
D. Thermocouple
A
B
C
D
3. Light the burner.
If the burner does not ignite, adjust the crown and
cap again.
TURNING THE BURNER OFF
To put the flame out, turn the knob to the off
position
The spark generator can start
automatically when you switch on the
mains, after installation or a power cut.
It is normal.
.
WARNING! Always turn the flame
down or switch it off before you
remove the pans from the burner.
WARNING! Do not put unstable or
damaged pots on the burner to
prevent spills and injuries.
CAUTION! Make sure that pot
handles are not above the front edge
of the cooktop.
11