Califone Spirit 1776 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Califone Spirit 1776. Califone Spirit 1776 9 pagina's. Multimedia player/recorder
Ook voor Califone Spirit 1776: Specificaties (1 pagina's), Gebruikershandleiding (17 pagina's), Gebruiksaanwijzing (12 pagina's), Productcatalogus (8 pagina's)

Pagina afdrukken

Handling Compact Discs

Inserting a CD

This unit is designed to play only compact discs bearing the

identification logo below. Other discs may not conform to

the CD standard and may not play properly.

INSERT WITH

THE LABEL

FACING UP.

• Dirty, scratched or warped disc may cause skipping or noise.

PRESS THE

• Handle the disc only by the edges. To keep clean, do not

DISC GENTLY

touch its surface.

TO INSERT IT.

• Discs should be stored in their cases after use to avoid

serious scratches.

• Do not expose disc to direct sunlight, high humidity, high

temperatures or dust etc. Prolonged exposure to extreme

temperatures can warp the disc.

• Do not stick or write anything on either side of disc. Sharp

writing instruments, or the inks used in some felt tip pens,

may damage its surface.

CORRECT

FROM THE CENTER TO THE EDGE

Cleaning Disc

• Finger prints should be carefully wiped from the surface of

disc with a soft cloth. Unlike conventional records, compact discs

have no grooves to collect dust and microscopic debris, so gently

wiping them with a soft cloth should remove most particles.

Wipe in a straight motion from the center to the edge.

• Never use thinner, benzine, record cleaner or anti-static spray

on a compact disc as they can damage its plastic surface.

INSERT WITH

PRESS THE CLAWS

THE LABEL

AT THE CENTER OF

INSERT WITH

FACING UP.

PRESS THE CLAWS

THE DISC CASE.

THE LABEL

AT THE CENTER OF

FACING UP.

THE DISC CASE.

PRESS THE CLAWS

AT THE CENTER OF

THE DISC CASE.

PRESS THE

LIFT OUT WITHOUT

DISC GENTLY

TOUCHING THE

PRESS THE

TO INSERT IT.

LIFT OUT WITHOUT

RECORDED SURFACE.

DISC GENTLY

TOUCHING THE

TO INSERT IT.

RECORDED SURFACE.

LIFT OUT WITHOUT

TOUCHING THE

RECORDED SURFACE.

INCORRECT

CORRECT

INCORRECT

CORRECT

INCORRECT

FROM THE CENTER TO THE EDGE

Cassette Deck Operation

Califone recommends the use of C-60 tapes. Tapes longer than this are thinner and are

more prone to breakage or jamming the internal mechanisms.

Cassette Playback

• Set the Function switch to TAPE.

• Press STOP/EJECT to open the cassette holder.

• Insert a recorded cassette.

• Adjust the sound using the VOLUME and DBBS controls.

• Press PLAY and playback will start.

• Playback stops when the tape in the deck reaches the end.

• For brief interruptions, press PAUSE.

• To restart playback, press this button once more.

• To stop, press STOP/EJECT.

• When the end of the tape is reached the PLAY button is released.

• The set will be switched off if the Function switch is in TAPE position and no buttons are pressed.

Cassette Recording from the built-in mic

Cassette recordings are ideal for creating permanent records of a group project or student progress with the built-in microphone.

• Set the function switch to "Tape"

• Press STOP/EJECT to open the cassette holder.

• Insert a blank cassette.

• Start recording by pressing RECORD (the PLAY button is automatically pressed).

• When the end of the tape is reached, the recorder buttons are released.

• To interrupt recording, press PAUSE.

• To continue recording, press PAUSE again.

• Press STOP/EJECT if you want to stop recording before the end of the tape. When pressed again, the cassette holder will open.

• The set is switched off if the Function switch is in position TAPE and no buttons are pressed.

Recording from the CD-player

• Insert a blank or pre-recorded tape into the cassette compartment.

• Set the Function switch to CD.

• Start recording by pressing RECORD of the cassette deck (the PLAY button is automatically also pressed).

• Press PLAY/PAUSE of CD control to desired play track or from the beginning of the programmed selection.

• As soon as the desired passage is reached, pause the CD and then start recording by pressing RECORD.

Recording from the Radio

• Insert a blank or pre-recorded tape into the cassette compartment.

• Set the Function selector to RADIO.

• Select the wave band using the BAND SELECT switch.

• Tune to desired radio station using the TUNING control.

• Start recording by pressing record of cassette deck.