Directed XpressKit DBALL Handmatig - Pagina 3

Blader online of download pdf Handmatig voor {categorie_naam} Directed XpressKit DBALL. Directed XpressKit DBALL 14 pagina's. Ford5 remote start ready (rsr) installation
Ook voor Directed XpressKit DBALL: Installatiehandleiding (16 pagina's), Installatiehandleiding (16 pagina's), Handmatig (19 pagina's)

Pagina afdrukken

Platform: DBALL/DBALL2

Firmware: FORD5 Range Extender Ready (RXT) Installation

Wiring Diagram

Important!

The Remote Start Safety Override Switch is a mandatory safety device, but is NOT supplied with the DBALL.

OBDII Diagnostic Connector

MS CAN High:

HS CAN High:

Gray/Orange, pin 3

White/Blue, pin 6

MS CAN Low:

HS CAN Low:

Violet/Orange, pin 11

White, pin 14

(-) Ground:

Black or Black/White, pin 4

With the exception of the OBDII Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise).

MS CAN High: Tan/Black: 3

MS CAN Low: Tan: 4

(+) 12V:

pin 16

HS CAN High: Orange/Green: 5

HS CAN Low: Orange/Brown: 6

(+) 12V: Red: 13

(-) Ground: Black: 14

DBALL/

Prog. Button

DBALL2

LED

You can connect to either a XL202

RFTD OR a SmartStart module.

Refer to the SmartStart/XL202

Installation Notes for more information.

Rev.: 20160317

Page 3