Clarke 3120193 Gebruiks- en onderhoudsinstructies - Pagina 8

Blader online of download pdf Gebruiks- en onderhoudsinstructies voor {categorie_naam} Clarke 3120193. Clarke 3120193 17 pagina's. Multi-sander kit

BEFORE USE

WARNING: COMPRESSED AIR CAN BE DANGEROUS. ENSURE THAT YOU

ARE FAMILIAR WITH ALL PRECAUTIONS RELATING TO THE USE OF AIR

COMPRESSORS AND COMPRESSED AIR SUPPLIES.

CONNECTING AIR HOSES

NOTE: Ensure the compressor is turned off while connecting hoses.

1. If required, connect an in-line lubricator to the tool.

• A lubricator helps to prolong the life of the air tool.

2. If a lubricator is not being used, run

a few drops of oil through the tool

before use. It can be entered

through the air inlet or via the hose

at the nearest connection to the

air supply.

3. Connect a suitable hose to the air

inlet as shown.

4. Connect the other end of the hose

to the compressor.

Your air tool is now ready for use.

You can fit a whip hose with a quick fit coupling if required (available from

your Clarke dealer).

INSTALLING THE COLLET

1. Select the grinding stone you require.

2. Two collets of different sizes are

provided. Select whichever fits

the shank of the stone you have

chosen.

• One collet may already be

installed in the grinder.

3. If the other collet is to be used,

undo the retaining collar

completely and pull out the collet

from the collet seat. Replace it

with the new collet and screw the collar loosely back on.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]