Clarke 3120193 Инструкции по эксплуатации и техническому обслуживанию - Страница 8
Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и техническому обслуживанию для Сандер Clarke 3120193. Clarke 3120193 17 страниц. Multi-sander kit
Печатать страницу
BEFORE USE
WARNING: COMPRESSED AIR CAN BE DANGEROUS. ENSURE THAT YOU
ARE FAMILIAR WITH ALL PRECAUTIONS RELATING TO THE USE OF AIR
COMPRESSORS AND COMPRESSED AIR SUPPLIES.
CONNECTING AIR HOSES
NOTE: Ensure the compressor is turned off while connecting hoses.
1. If required, connect an in-line lubricator to the tool.
• A lubricator helps to prolong the life of the air tool.
2. If a lubricator is not being used, run
a few drops of oil through the tool
before use. It can be entered
through the air inlet or via the hose
at the nearest connection to the
air supply.
3. Connect a suitable hose to the air
inlet as shown.
4. Connect the other end of the hose
to the compressor.
Your air tool is now ready for use.
You can fit a whip hose with a quick fit coupling if required (available from
your Clarke dealer).
INSTALLING THE COLLET
1. Select the grinding stone you require.
2. Two collets of different sizes are
provided. Select whichever fits
the shank of the stone you have
chosen.
• One collet may already be
installed in the grinder.
3. If the other collet is to be used,
undo the retaining collar
completely and pull out the collet
from the collet seat. Replace it
with the new collet and screw the collar loosely back on.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
8