Aleko Victoria Series Installatiehandleiding - Pagina 10

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Aleko Victoria Series. Aleko Victoria Series 17 pagina's. Sizes 6.5x5 8x6.5 10x8
Ook voor Aleko Victoria Series: Installatiehandleiding (20 pagina's), Handleiding voor installatie en gebruik (12 pagina's), Montagehandleiding (14 pagina's)

STEP 6: Front Bar & Arm Assembly

WARNING

s ecure d to the torsion bar. Failure to check this could result in injury.

•

Put the arm bar link (Q) and the blocker (P) into the front bar (wedge shaped piece).

Move the blocker (P) in front of arm.

Move the arm bar link (Q) until it connects with the arm's hole.

4. Align the front bars and the arms.

Using a Phillips screwdriver, tighten both bolts upwardly.

Fasten the arm bar's self locking nut to the front bar tightly, using a ribbon tube spanner.

Lastly, place the blocker (P) in the front barinfront of the arm eitherin the

middle of the arm or closer to the elbow of the arm.

etStii&tJli £ &tM

1. Tap the front bar caps

2. At this point, it is safe to cut the safety sleeves that hold the arms and torsion bar down. Awning assembly is

complete!

Be sure that the saf et y sle eves holding th e two front bar arms are

Insert in

(R)

and the torsion bar caps

Steps 7-7

(D)

into place.

p Q

-i.:ghten