Aleko Victoria Series Instrukcja instalacji - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria Aleko Victoria Series. Aleko Victoria Series 17 stron. Sizes 6.5x5 8x6.5 10x8
Również dla Aleko Victoria Series: Instrukcja instalacji (20 strony), Instrukcja instalacji i obsługi (12 strony), Instrukcja montażu (14 strony)
Drukuj stronę
STEP 6: Front Bar & Arm Assembly
f
WARNING
s ecure d to the torsion bar. Failure to check this could result in injury.
•
1.
Put the arm bar link (Q) and the blocker (P) into the front bar (wedge shaped piece).
Move the blocker (P) in front of arm.
2.
3.
Move the arm bar link (Q) until it connects with the arm's hole.
4. Align the front bars and the arms.
5.
Using a Phillips screwdriver, tighten both bolts upwardly.
6.
Fasten the arm bar's self locking nut to the front bar tightly, using a ribbon tube spanner.
Lastly, place the blocker (P) in the front barinfront of the arm eitherin the
7.
middle of the arm or closer to the elbow of the arm.
etStii&tJli £ &tM
Q
p
y
tJ
STEP 7: Finishing Awning Assembly
1. Tap the front bar caps
2. At this point, it is safe to cut the safety sleeves that hold the arms and torsion bar down. Awning assembly is
complete!
Be sure that the saf et y sle eves holding th e two front bar arms are
Insert in
(R)
and the torsion bar caps
v
v
Steps 7-7
(D)
into place.
v
8
p Q
tJ
-i.:ghten
y