Alemite 9911-1 Servicehandleiding - Pagina 9

Blader online of download pdf Servicehandleiding voor {categorie_naam} Alemite 9911-1. Alemite 9911-1 12 pagina's. High-pressure stripped pump
Ook voor Alemite 9911-1: Gebruikershandleiding (16 pagina's), Servicehandleiding (12 pagina's)

Pagina afdrukken

High-Pressure Grease Pump

Figure 4 Pump Tube Assembly 338086-A1 and -C1 - Section View

Alemite, LLC

Refer to Figures 2-A and 2-B Parts List

for Parts Identification

Pump Tube Assembly

1. Install and seat Seal (12) [heel end

first] into the bottom of the Body.

2. Install and seat Lantern Ring (13)

[small diameter end first] into the

Body.

3. Install and seat Seal (14) [heel end

first] into the Body.

4. Install and seat Bearing (15) [small

diameter end first] into the Body.

5. Install and seat Gasket (16) into the

Body.

Steps for Model 9979 Only

6. Screw Rod (9) into Extension (23)

until the Pin holes align.

• Secure the Extension to the Rod

with Roll Pin (24).

7. Install Ball (27), Spring (26), and

Spring Guide (25) [pointed end first]

into Piston (28).

8. Screw the Piston assembly onto the

Extension until the Pin holes align.

• Secure the Piston to the Extension

with Roll Pin (24).

9. Screw the Piston assembly onto the

Rod until the Pin holes align.

• Secure the Piston to the Rod with

Roll Pin (24).

10. Screw Primer Rod (38) into the Piston

assembly until the Pin holes align.

• Secure the Piston assembly to the

Primer Rod with Roll Pin (29).

11. Install and seat Bearing (30), Seal

(31) [heel end first], and additional

Bearing (30) into the externally

threaded end of Lower Tube (33).

12. Install and seat Gasket (32) into the

internally threaded end of Lower

Tube (22).

SER 9930

Step for Model 9979 Only

Step for Model 9930 Only

Revision (8-10)