Directed Electronics 3200HS Gebruikershandleiding - Pagina 12
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Directed Electronics 3200HS. Directed Electronics 3200HS 19 pagina's. Remote start keyless entry system
Pagina afdrukken
disabling the system without a transmitter
If your remote transmitter is lost or damaged, you can manually
override the system. To do this, you must have the vehicle's igni-
tion key and know where the Valet
check with the installer for the location of the Valet
To disarm the security system,
the ignition to the ON posi-
tion. Press and release the
Valet
switch
seconds. The status LED will
stop flashing and the vehicle
should start. If the vehicle
does not start, you may have
waited too long; turn the igni-
tion off and repeat the process.
Location of Valet Button_________________________________
silent mode
To temporarily turn off the arm or disarm chirps, use Silent
Mode™. Simply press
arming or disarming, and the confirmation chirp(s) will be elim-
inated for that one operation only. If you want the arm/disarm
chirps turned off permanently, your dealer can do this for you.
8
®
switch is located. Be sure to
®
switch.
within
10
DRW-35
for less than one second before
© 2002 directed electronics, inc.
turn