Directed Electronics 3200HS Kullanıcı El Kitabı - Sayfa 12
Uzaktan Çalıştırıcı Directed Electronics 3200HS için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Directed Electronics 3200HS 19 sayfaları. Remote start keyless entry system
Sayfayı Yazdır
disabling the system without a transmitter
If your remote transmitter is lost or damaged, you can manually
override the system. To do this, you must have the vehicle's igni-
tion key and know where the Valet
check with the installer for the location of the Valet
To disarm the security system,
the ignition to the ON posi-
tion. Press and release the
Valet
switch
seconds. The status LED will
stop flashing and the vehicle
should start. If the vehicle
does not start, you may have
waited too long; turn the igni-
tion off and repeat the process.
Location of Valet Button_________________________________
silent mode
To temporarily turn off the arm or disarm chirps, use Silent
Mode™. Simply press
arming or disarming, and the confirmation chirp(s) will be elim-
inated for that one operation only. If you want the arm/disarm
chirps turned off permanently, your dealer can do this for you.
8
®
switch is located. Be sure to
®
switch.
within
10
DRW-35
for less than one second before
© 2002 directed electronics, inc.
turn