CTEK MXS 5.0 CHECK Handmatig
Blader online of download pdf Handmatig voor {categorie_naam} CTEK MXS 5.0 CHECK. CTEK MXS 5.0 CHECK 8 pagina's. Combined battery charger warranty and battery&alternator check
Ook voor CTEK MXS 5.0 CHECK: Handmatig (2 pagina's)
Pagina afdrukken
MANUAL
CONGRATULATIONS
on the purchase of your new professional switched mode battery charger and bat-
tery check instrument. This charger is included in a series of professional chargers from
CTEK SWEDEN AB and represents the latest technology in battery charging.
SUPPLY PLUG*
CTEK COMFORT CONNECT
MODE
CHARGE CABLE
H05RN–F Rubber
HPN Rubber Cable
CTEK COMFORT CONNECT – eyelet M6
* Supply plugs may differ to suit your wall socket.
MAINS CABLE
H05RN-F Rubber
VOLTAGE CHECK PROGRAM
BATTERY
START POWER
ALTERNATOR
MXS 5.0
CHECK BY
RECOND
HPN Rubber Cable
CTEK COMFORT CONNECT – clamp
HOW TO CHARGE
1. Connect the charger to the battery. Lamp 4, 5 and 6 now start flickering indicating
VOLTAGE CHECK PROGRAM. Ignore this and continue with the next step.
2. Connect the charger to the wall socket. The power lamp will indicate that the mains
cable is connected to the wall socket. The error lamp will indicate if the battery clamps
are incorrectly connected. The reverse polarity protection will ensure that the battery
or charger will not be damaged.
3. Press the MODE-button to select charging program.
4. Follow the 8-step display through the charging process.
The battery is ready to start the engine when STEP 4 is lit.
The battery is fully charged when STEP 7 is lit.
Stop charging at any time by disconnecting the mains cable from the wall socket.
Note: If the charger indicates START POWER VOLTAGE CHECK PROGRAM lamp
and BAD lamp press MODE-button for 2 sec to exit VOLTAGE CHECK PROGRAM.
REAdY TO USE
MOdE-BUTTON
ERROR LAMP
MODE
BATTERY
POWER LAMP
SMALL
NORMAL
BATTERY
BATTERY
PROGRAM
PROGRAM
FULLY CHARGEd
VOLTAGE CHECK PROGRAM
START POWER
ALTERNATOR
MXS 5.0
RECOND
COLd
RECONd
WEATHER
OPTION
OPTION
CHECK BY
EN • 3