Clarke Contractor CCS2 Bedienings- en onderhoudshandleiding - Pagina 3
Blader online of download pdf Bedienings- en onderhoudshandleiding voor {categorie_naam} Clarke Contractor CCS2. Clarke Contractor CCS2 6 pagina's. 185mm
Pagina afdrukken
Parts Diagram
10
Safety Precautions
WARNING:
As with all machinery, there are certain hazards involved with their operation
and use. Exercising respect and caution will considerably lessen the risk of
personal injury. However, if normal safety precautions are overlooked or
ignored, personal injury to the operator or damage to property, may result.
1. ALWAYS learn the machines' applications, limitations and the specific potential hazards
peculiar to it. Read and become familiar with the entire operating
manual.
2. ALWAYS use a face or dust mask if operation is particularly dusty.
3. ALWAYS check for damage. Before using the machine, any damaged
part, should be checked to ensure that it will operate properly, and
perform its intended function.
Check for alignment of moving parts, breakage of parts, mountings,
and any other condition that may affect the machines' operation. Any damage
should be properly repaired or the part replaced. If in doubt, DO NOT use the machine.
Consult your local dealer.
4. ALWAYS disconnect the tool/machine from the power supply before servicing and when
changing accessories.
5. ALWAYS wear safety goggles, manufactured to the latest European Safety Standards.
Everyday eyeglasses do not have impact resistant lenses, they
are not safety glasses.
6. ALWAYS keep work area clean. Cluttered areas and benches
invite accidents.
7. ALWAYS ensure that adequate lighting is available. A minimum
intensity of 300 lux should be provided. Ensure that lighting is
placed so that you will not be working in your own shadow.
8. ALWAYS keep children away. All visitors should be kept a safe distance from the work
area, especially whilst operating the machine.
9. ALWAYS use CLARKE replacement blades. The use of improper
parts/accessories could be hazardous.
10. ALWAYS maintain machine in top condition. Keep tools/machines
clean for the best and safest performance. Follow maintenance
instructions.
11. ALWAYS handle with extreme care do not carry the tool/machine
by its' electric cable, or yank the cable to disconnect it from the power supply .
12. ALWAYS ensure the switch is off before plugging in to mains. avoid accidental starting.
13. ALWAYS concentrate on the job in hand, no matter how
trivial it may seem. Be aware that accidents are caused
by carelessness due to familiarity.
14. ALWAYS keep your proper footing and balance at all times
don't overreach. For best footing, wear rubber soled
footwear. Keep floor clear of oil, scrap wood, etc.
3