Clarke Contractor CCS2 Kullanım ve Bakım Kılavuzu - Sayfa 3

Testere Clarke Contractor CCS2 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Clarke Contractor CCS2 6 sayfaları. 185mm

Parts Diagram

WARNING:

As with all machinery, there are certain hazards involved with their operation

and use. Exercising respect and caution will considerably lessen the risk of

personal injury. However, if normal safety precautions are overlooked or

ignored, personal injury to the operator or damage to property, may result.

1. ALWAYS learn the machines' applications, limitations and the specific potential hazards

peculiar to it. Read and become familiar with the entire operating

manual.

2. ALWAYS use a face or dust mask if operation is particularly dusty.

3. ALWAYS check for damage. Before using the machine, any damaged

part, should be checked to ensure that it will operate properly, and

perform its intended function.

Check for alignment of moving parts, breakage of parts, mountings,

and any other condition that may affect the machines' operation. Any damage

should be properly repaired or the part replaced. If in doubt, DO NOT use the machine.

Consult your local dealer.

4. ALWAYS disconnect the tool/machine from the power supply before servicing and when

changing accessories.

5. ALWAYS wear safety goggles, manufactured to the latest European Safety Standards.

Everyday eyeglasses do not have impact resistant lenses, they

are not safety glasses.

6. ALWAYS keep work area clean. Cluttered areas and benches

invite accidents.

7. ALWAYS ensure that adequate lighting is available. A minimum

intensity of 300 lux should be provided. Ensure that lighting is

placed so that you will not be working in your own shadow.

8. ALWAYS keep children away. All visitors should be kept a safe distance from the work

area, especially whilst operating the machine.

9. ALWAYS use CLARKE replacement blades. The use of improper

parts/accessories could be hazardous.

10. ALWAYS maintain machine in top condition. Keep tools/machines

clean for the best and safest performance. Follow maintenance

instructions.

11. ALWAYS handle with extreme care do not carry the tool/machine

by its' electric cable, or yank the cable to disconnect it from the power supply .

12. ALWAYS ensure the switch is off before plugging in to mains. avoid accidental starting.

13. ALWAYS concentrate on the job in hand, no matter how

trivial it may seem. Be aware that accidents are caused

by carelessness due to familiarity.

14. ALWAYS keep your proper footing and balance at all times

don't overreach. For best footing, wear rubber soled

footwear. Keep floor clear of oil, scrap wood, etc.