Dirt Devil DDCW600 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dirt Devil DDCW600. Dirt Devil DDCW600 12 pagina's.

---

Operation

Putting your cleaner together

Stand the base in the upright

position. Assemble the mid section

onto the base, taking care not to

trap internal mains wire.

How to opereate your cleaner

Important: Turn off when emptying

and filling the reservoir.

Grasp the solution reservoir under

the handle and press the release

lever upward.

Phillips screwdriver required

Insert the three nuts into the

recesses located on the left and

right sides and the middle of the

back of the base.

While holding the nuts in place

insert screws through the front of

the mid section and tighten.

Tilt the solution reservoir away

from the cleaner and remove.

AU: 1300 361 505 / NZ: 0800 800 900

Slide upper handle down onto the

unit. Insert nut into the recess in

the back of the upper handle.

While holding the nut in place

insert the screw through the front

of the upper handle and tighten.

Run the mains cable above the

upper cord hook and secure with

the cord clip.

Unscrew the filler/ measuring cap

from the rear of the solution

reservoir.

Note: Always use the

filler/measuring cap from the

reservoir to determine precise

solution quantity.

Dirt Devil Service line