Dirt Devil DDCW600 Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dirt Devil DDCW600. Dirt Devil DDCW600 12 pagina's.

---

Maintenance

IMPORTANT:

The float in your Dirt Devil is the blue piece in the dirty water tank lid. It will shut off the suction when the dirty water tank is full.

However, the float may rise prematurely cutting off the suction before the dirty water tank is full under the following conditions -

1. Using a jerky, uneven motion while washing.

2. Tipping the cleaner and breaking the seal between the carpet and the nozzle on the machine.

Once the float is activated, empty the dirty water tank. If the tank doesn't appear full turn off the power switch and wait for the float to settle.

You will hear a distinct change in the

noise coming from your cleaner when

the tank is full and needs emptying.

Important: Unplug your cleaner

before emptying the dirty water tank.

Grasp the top of the dirty water tank

handle and press the release latch.

Emptying the dirt water tank

To empty the water tank grasp the

handle with one hand and nozzle

with the other and empty into the

sink.

(Keep your Dirt Devil as good as new)

Grasp the handle and pull up out of

the base. Take care that dirty water

does not leak from the front.

Cleaning the dirt water tank

Rinse the dirty water tank and filter

thoroughly with warm water. You

should allow them to dry fully

before replacing them on your

cleaner to prevent mildew.

Do not use any chemicals in the

cleaning process.

AU: 1300 361 505 / NZ: 0800 800 900

Remove dirty water tank lid.

Dirt Devil Service line