Dirty Hand Tools 100450 Bedieningshandleiding - Pagina 10
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Dirty Hand Tools 100450. Dirty Hand Tools 100450 16 pagina's. 3-point hitch vertical/horizontal log splitter
Pagina afdrukken2. Unpacking the Container
Step 1: Remove top and sides of crate. Use a #2 phillips
head and 8mm driver to remove hardware from the
plywood shipping crate (shown above). Remove the
straps securing the frame to the side of the crate.
Due to the use of wood staples, it may be necessary
to use a hammer and/or a crow bar to fully remove
the packaging top and sides.
Step 2: Remove restraining bolts (tee nut bolts) from
the beam assembly. Use a 13mm wrench or socket
to remove the two hex bolts that are securing the
beam to the crate bottom (as shown below). Please
note that the two hex bolts are located diagonally
opposed to each other.
Step 3: Remove Tank & Engine Assembly from crate,
then remove the Beam & Cylinder Assembly. Lift
Beam & Cylinder Assembly to its vertical position
standing on the footplate.
10