Dirty Hand Tools 100450 Bedieningshandleiding - Pagina 8

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Dirty Hand Tools 100450. Dirty Hand Tools 100450 16 pagina's. 3-point hitch vertical/horizontal log splitter

Pagina afdrukken

1. Maintenance

Important Safety Information

REPAIR AND MAINTENANCE

• Do not operate the log splitter when it is in poor mechanical

condition or in need of repair. Frequently check that all nuts,

bolts, screws, hydraulic ﬁttings and hose clamps are tight.

• Do not alter the log splitter in any manner. Any alteration will

void the warranty and could cause the log splitter to be unsafe

to operate. Perform all recommended maintenance procedures

before using the log splitter. Replace all damaged or worn parts

immediately.

• Replacement parts must meet manufacturer's speciﬁcations.

HYDRAULIC SAFETY

e hydraulic system of the log splitter requires careful inspection

along with the mechanical parts. Be sure to replace frayed, kinked,

cracked or otherwise damaged hydraulic hoses or hydraulic

components.

• Check for hydraulic uid leaks by passing a piece of paper or

cardboard underneath or over the area of the leak. Do not check

for leaks with your hand. Fluid escaping from the smallest hole,

under pressure, can have enough force to penetrate the skin causing

serious injury or death.

• Seek professional medical attention immediately if injured

by escaping hydraulic uid. Serious infection or reaction can

develop if medical treatment is not administered immediately.

• Relieve all pressure by shutting oﬀ the engine and moving the

valve control handle back and forth should it become necessary to

loosen or remove any hydraulic ﬁtting.

• Do not adjust the hydraulic valve.

the log splitter is preset at the factory. Only a quali ed service

technician should perform this adjustment.

WARNING

e pressure relief valve on