ABBAKA Hy-Ex 1.4K Installatie-instructies - Pagina 3

Blader online of download pdf Installatie-instructies voor {categorie_naam} ABBAKA Hy-Ex 1.4K. ABBAKA Hy-Ex 1.4K 4 pagina's. Exterior wall or roof mount ventilator

Pagina afdrukken

Architectural Kitchen Range Hoods

WARNING: Turn off power at the service box

before wiring.

1. Power supply for the ventilator is 115V AC 60

Hz. See page 2 for specifications.

2. Run electrical cable between the ventilator and

the range hood or ventilator and wall switch. See

Figure 3

3. Remove top enclosure of the ventilator for ac-

cess to the wiring terminal block.

4. Push the electrical cable up through the bottom

knock out of the ventilator body. Pull enough wire

up into the housing to make attachment to the

terminal block.

5. Connect white to "NEU", green to "GND" and

red speed control wire to "LINE". See Figure 4.

Figure 4

Green/Yellow

(Ground)

Brown

White

Black

Blue

Capacitor

DUCT CONNECTIONS

WARNING: To reduce risk of fire, use only metal

ductwork.

1. Use only round metal duct, elbows and transi-

tions; or rectangular ducting having equivalent

area of square inches as per required duct size.

2. Tape all joints with duct tape.

3. Turn on power and check ventilator operation.

4. Make sure damper opens and closes freely.

P.O. Box 215, Bodega Bay, CA 94923 (800) 548-3932 Fax (800) 548-3930

ELECTRICAL CONNECTIONS

Green

White

E-mail: [email protected] http://www.abbaka.com

Figure 3

VENTILATOR

Black

Range Hood

White

Black

IA-031 8/03

Page 3