3D AEROWORKS Pilatus PC-21 Montagehandleiding en gebruikershandleiding - Pagina 15
Blader online of download pdf Montagehandleiding en gebruikershandleiding voor {categorie_naam} 3D AEROWORKS Pilatus PC-21. 3D AEROWORKS Pilatus PC-21 19 pagina's.
Pagina afdrukken
BALANCING AND CG
22
The ballast lead required should be placed in the hollow section of fuse 1. NOTE! Balancing
needs to be done with the propeller attached. See below
Fit the battery using Velcro as required and balance the aircraft inverted on the CG marking
points located 60mm aft of the leading edge at the wing root.
Once balanced appropriately, glue Fuse 1in place with ca.