3D Hobby Shop 49 Sukhoi 26MX Montagehandleiding - Pagina 14

Blader online of download pdf Montagehandleiding voor {categorie_naam} 3D Hobby Shop 49 Sukhoi 26MX. 3D Hobby Shop 49 Sukhoi 26MX 18 pagina's.

Mount the rudder servo as shown. Assemble the front ends of the cables as shown. Apply a drop of thin

CA to the completed crimps. Adjust the cables to be snug, but not too tight. "Banjo-string" tight cables

rob power from the servo. Tighten the set screw in the adjuster with a 1.5mm hex driver. Check your

cables after your maiden flight and after the first few flights. Adjust as necessary to remain snug.