3D Hobby Shop 49 Sukhoi 26MX Montaj Kılavuzu - Sayfa 14

Oyuncak 3D Hobby Shop 49 Sukhoi 26MX için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. 3D Hobby Shop 49 Sukhoi 26MX 18 sayfaları.

Mount the rudder servo as shown. Assemble the front ends of the cables as shown. Apply a drop of thin

CA to the completed crimps. Adjust the cables to be snug, but not too tight. "Banjo-string" tight cables

rob power from the servo. Tighten the set screw in the adjuster with a 1.5mm hex driver. Check your

cables after your maiden flight and after the first few flights. Adjust as necessary to remain snug.