3D Hobby Shop 62 inch OSIRIS Montagehandleiding - Pagina 3

Blader online of download pdf Montagehandleiding voor {categorie_naam} 3D Hobby Shop 62 inch OSIRIS. 3D Hobby Shop 62 inch OSIRIS 14 pagina's.

Pagina afdrukken
3
The Osiris main landing gear are pre-assembled. Insert each gear into the pre-cut slot in the side of the
fuselage and attach with QTY 4 4-40 screws and washers. Use blue Loctite or similar threadlocker on
these screws.
Remove covering over horizontal stabilizer opening and the single elevator servo opening in fuselage.