3D Hobby Shop 62 inch OSIRIS Montageanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Montageanleitung für Spielzeug 3D Hobby Shop 62 inch OSIRIS herunter. 3D Hobby Shop 62 inch OSIRIS 14 Seiten.

The Osiris main landing gear are pre-assembled. Insert each gear into the pre-cut slot in the side of the

fuselage and attach with QTY 4 4-40 screws and washers. Use blue Loctite or similar threadlocker on

these screws.

Remove covering over horizontal stabilizer opening and the single elevator servo opening in fuselage.