3D Hobby Shop EPP EXTRA 330SC Montagehandleiding - Pagina 4
Blader online of download pdf Montagehandleiding voor {categorie_naam} 3D Hobby Shop EPP EXTRA 330SC. 3D Hobby Shop EPP EXTRA 330SC 15 pagina's. Arf rc
Pagina afdrukkenServo connectors are installed onto servo arms as shown. Drill the holes in your servo arms to the right
size to allow the connectors to easily spin on the servo arm. Attach with the nut, but do not tighten all the
way, the connector must remain able to twist on the servo arm. Lock the nut with a drop of medium CA so
that it cannot vibrate loose in the air. The pushrod can be cut to length. The elevator and rudder will use the same system.
Next, install the hooks into the root of the wings with either Welders or medium CA. Be sure the open end of the hook
points up, as this provides the wing attachment system.