3D Hobby Shop EPP EXTRA 330SC 조립 설명서 - 페이지 4

{카테고리_이름} 3D Hobby Shop EPP EXTRA 330SC에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Hobby Shop EPP EXTRA 330SC 15 페이지. Arf rc

Servo connectors are installed onto servo arms as shown. Drill the holes in your servo arms to the right

size to allow the connectors to easily spin on the servo arm. Attach with the nut, but do not tighten all the

way, the connector must remain able to twist on the servo arm. Lock the nut with a drop of medium CA so

that it cannot vibrate loose in the air. The pushrod can be cut to length. The elevator and rudder will use the same system.

Next, install the hooks into the root of the wings with either Welders or medium CA. Be sure the open end of the hook

points up, as this provides the wing attachment system.