3D Hobby Shop Extra SHP 47" Montagehandleiding - Pagina 8

Blader online of download pdf Montagehandleiding voor {categorie_naam} 3D Hobby Shop Extra SHP 47". 3D Hobby Shop Extra SHP 47" 20 pagina's. Arf rc

Drip thin CA glue into the stabilizer-fuselage joint. Do not remove any covering from the horizontal

stabilizer.

Apply medium CA into the slot in fuselage and install vertical stabilizer.

Drop a few drops of thin CA onto the elevator joiner rod at the factory joint of elevator and rod. Allow to

soak in for a few minutes, then wipe off excess.