3D Hobby Shop Extra SHP 47" Manuel d'assemblage - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'assemblage pour {nom_de_la_catégorie} 3D Hobby Shop Extra SHP 47". 3D Hobby Shop Extra SHP 47" 20 pages. Arf rc

Imprimer la page

Drip thin CA glue into the stabilizer-fuselage joint. Do not remove any covering from the horizontal

stabilizer.

Apply medium CA into the slot in fuselage and install vertical stabilizer.

Drop a few drops of thin CA onto the elevator joiner rod at the factory joint of elevator and rod. Allow to

soak in for a few minutes, then wipe off excess.