Abbott FreeStyle Libre 3 Snelstarthandleiding
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Abbott FreeStyle Libre 3. Abbott FreeStyle Libre 3 2 pagina's. Continuous glucose monitoring system
Ook voor Abbott FreeStyle Libre 3: Snelstarthandleiding (2 pagina's)
Pagina afdrukken
CONTINUOUS GLUCOSE MONITORING SYSTEM
Quick Start Guide
●
1
Apply Sensor to your body
STEP 1
Select site on back of upper arm.
Note:
Avoid scars, moles, stretch
marks, lumps and insulin injection
sites. To prevent skin irritation,
rotate sites between applications.
Consider your comfort and activities.
STEP 4
Place Sensor Applicator over site
and push down firmly to apply Sensor.
Do NOT push down on
CAUTION:
Sensor Applicator until placed over
prepared site to prevent unintended
results or injury.
●
2
Start new Sensor with Reader
STEP 1
10:23
No Active Sensor
View Glucose
Review History
Start New Sensor
Press Home Button to turn on Reader.
Then touch Start New Sensor when
you see this screen.
If using Reader for the first time,
Note:
follow the prompts to set up the Reader.
Setup Overview
Refer to your User's Manual for full System instructions and information.
Reader
USB Port
STEP 2
Wash site using a plain soap,
dry and then clean with alcohol
wipe. Allow site to air-dry before
proceeding.
STEP 5
Sensor
Gently pull Sensor Applicator
away from your body.
STEP 2
Start New Sensor
Scan Sensor to start it.
Hold the Reader so the
screen touches the
Sensor.
Hold Reader so that the screen touches the Sensor
to start it. You may need to move your Reader
around slowly until you find the right spot.
Note:
Before you start your Sensor, choose which
device you want to use. If you start the Sensor
with the Reader, you will be unable to use the App
to check your glucose or receive alarms.
●
1
Touchscreen
Home Button
●
2
Sensor
Applicator
●
3
Tamper
Label
Unscrew cap
from Sensor
Applicator.
CAUTION:
• Do NOT use if damaged or if tamper label
indicates Sensor Applicator has already
been opened.
• Do NOT put cap back on as it may damage
the Sensor.
• Do NOT touch inside Sensor Applicator as it
contains a needle.
Review the important information on the screen.
Reader will automatically display your glucose
reading after 60 minutes.
Apply Sensor to your body
Start new Sensor with Reader
Wait 60 minutes
for start-up
Check your glucose whenever you
want for up to 14 days
STEP 3
Cap
STEP 6
Make sure Sensor is secure.
Put the cap back on the Sensor
Applicator. Discard the used
Sensor Applicator. See Disposal
section in the User's Manual.
STEP 3
OK
New Sensor
Starting Up
Sensor can be used in:
60
minutes