3D Systems Cubify CUBEX Duo Vervangingshandleiding - Pagina 5
Blader online of download pdf Vervangingshandleiding voor {categorie_naam} 3D Systems Cubify CUBEX Duo. 3D Systems Cubify CUBEX Duo 13 pagina's. Replacing a main board pcb
Ook voor 3D Systems Cubify CUBEX Duo: Vervangingshandleiding (17 pagina's), Handmatig (10 pagina's), Handmatig (10 pagina's)
Pagina afdrukken
4. Remove the bolts holding the Feed Tube mount in place. The amount of bolt
will vary depending on the amount of print jets your CubeX has.
A CubeX will have the bolts circled in red.
A CubeX duo will have the two bolts circled in red and the bolt circled in green.
A CubeX trio has the bolts circled in red, green and blue.
5. You should now be able to move the Feed Tube mount from the top of the
print jets to expose the print jet mounting bolt.
5