3D Systems Cubify CUBEX Duo Değiştirme Kılavuzu - Sayfa 5
3D Yazıcılar 3D Systems Cubify CUBEX Duo için çevrimiçi göz atın veya pdf Değiştirme Kılavuzu indirin. 3D Systems Cubify CUBEX Duo 13 sayfaları. Replacing a main board pcb
Ayrıca 3D Systems Cubify CUBEX Duo için: Değiştirme Kılavuzu (17 sayfalar), Manuel (10 sayfalar), Manuel (10 sayfalar)
Sayfayı Yazdır
4. Remove the bolts holding the Feed Tube mount in place. The amount of bolt
will vary depending on the amount of print jets your CubeX has.
A CubeX will have the bolts circled in red.
A CubeX duo will have the two bolts circled in red and the bolt circled in green.
A CubeX trio has the bolts circled in red, green and blue.
5. You should now be able to move the Feed Tube mount from the top of the
print jets to expose the print jet mounting bolt.
5