3D Systems Cubify CUBEX Duo Vervangingshandleiding - Pagina 14
Blader online of download pdf Vervangingshandleiding voor {categorie_naam} 3D Systems Cubify CUBEX Duo. 3D Systems Cubify CUBEX Duo 17 pagina's. Replacing a main board pcb
Ook voor 3D Systems Cubify CUBEX Duo: Vervangingshandleiding (13 pagina's), Handmatig (10 pagina's), Handmatig (10 pagina's)
Pagina afdrukken
Fasten one side of the Y belt by placing it between the Y belt clamps and fastening
the two bolts. Apply equal pressure to each bolt to ensure the X motor mount stays
flat.
Pull the unfastened side of the Y belt through its corresponding clamp, pull it taught
with pliers and fasten the two bolts, again applying equal pressure to each bolt to
ensure the X motor mount stays flat.
Plug the X motor wire into the X motor
14