Dispense-Rite SLR-STRAW-2 Installatie- en bedieningsinstructies - Pagina 2

Blader online of download pdf Installatie- en bedieningsinstructies voor {categorie_naam} Dispense-Rite SLR-STRAW-2. Dispense-Rite SLR-STRAW-2 2 pagina's.

SECTION TWO - LOADING AND OPERATION
1
To load the straws they may inserted directly into the
opening on the faceplate.
2
To remove straws grasp with your thumb and index
finger and pull straight out.
JUMBO LENGTH STRAWS
This product is shipped configured for use with standard
length drinking straws (approximately 8.5" L).
If you are using a jumbo length straw you may need to
reverse the orienation of the plunger inside the dispenser
to accommodate longer straws.
1
To reverse the plunger the cover ring must be removed.
Turn the cover ring counterclockwise to remove from
dispenser.
2
Once the cover ring has been removed take the plunger
out of the front of the unit and reverse its orientation. It
may now be reinserted into the dispenser for use with
jumbo length straws.
3
Place straw dispenser cover ring on the mounting
head and rotate clockwise to secure.
Diversified Metal Products, Inc.
2205 Carlson Drive • Northbrook, IL 60062 • (847) 753-9595 • fax (847) 753-9648
www.dispense-rite.com • [email protected]